IPD 2400

Durch ihre außergewöhnliche Flexibilität, die hohe Leistungsdichte und wettbewerbsfähige Kosten ist die IPD 2400 gleichermaßen in permanenten Installationen, portablen AV-Systemen oder Live-PA-Setups zu Hause.

Technische Daten

Model IPD 2400
General
Number of amplifier channels 2
Max total output all channels driven 2400 W
Peak output voltage per channel 70 Vrms
Max output current per channel 20 Arms
Max output power (all channels driven)
2 ohms 800 W
4 ohms 1200 W
8 ohms 600 W
16 ohms 300 W
Performance
THD 20 Hz – 20 kHz at 1 W <0.1%
THD at 1 kHz and 1 dB below clipping <0.05%
Signal to Noise Ratio >102 dBA
Channel separation (Crosstalk) at 1 kHz >80 dB
Frequency Response 2 Hz – 42 kHz
Input impedance 18 kOhm
Common Mode Rejection (CMR) 50 dB
Output impedance 25 mOhm
Gain, Sensitivity and Limiters
SCVPL 100 V peak
Sensitivity for full power 6 dBu
Gain (all DSP controls set to 0 dB) 33.2 dB
Level adjustment (per channel) Software controlled from -inf to 0 dB
Connectors and Buttons
Analog input connectors (per ch.) Neutrik XLR, 3pin female
Analog input link connectors (per ch.) Neutrik XLR, 3pin male
AES input connectors (per ch.) Neutrik XLR, 3pin female
AES input link connectors (per ch.) Neutrik XLR, 3pin male
Output connectors (per ch.) Neutrik speakON / binding post
Buttons Power, Menu, Back, Mute (per ch.), Power
Encoder Adjust / Set
Cooling Dual fan, front to rear airflow, no filter required, temperature controlled speed
Power
Nominal voltage 100 – 240 VAC
Operating voltage 60 – 265 V AC
Standby consumption <7.5 W
Mains connector IEC inlet
Dimensions
Dimensions (Rack rail to rear panel) W: 483 mm (19”), H: 44 mm (1 U), D: 359 mm (14.1”)
Dimensions (Overall incl. handles and rear support) W: 483 mm (19”), H: 44 mm (1 U), D: 431 mm (17”)
Finish
Finish Black anodized aluminum front and black / gray steel chassis
Approvals
Approvals CE, PSE, UL 60065, CAN/CSA-C22.2, No.60065:03, FCC part 15 Class A, EN 55103-1, EN55103-2, ROHS
Nach oben