IPD 1200

Außergewöhnliche Flexibilität, hohe Leistungsdichte und wettbewerbsfähige Kosten machen den IPD 1200 gleichermaßen ob zu Hause, in permanenten Installationen, portablen AV-Systemen oder Live-PA-Setups aus.

Beschreibung

Model IPD 1200
General
Number of amplifier channels 2
Max total output all channels driven 1200 W
Peak output voltage per channel 50 Vrms
Max. output current 16 Arms
Max output power (all channels driven)
2 ohms 500 W
4 ohms 600 W
8 ohms 300 W
16 ohms 150 W
Performance
THD 20 Hz – 20 kHz at 1 W <0.1%
THD at 1 kHz and 1 dB below clipping <0.05%
Signal to Noise Ratio >102 dBA
Channel separation (Crosstalk) at 1 kHz >80 dB
Frequency Response 2 Hz – 42 kHz
Input impedance 18 kOhm
Common Mode Rejection (CMR) 50 dB
Output impedance 25 mOhm
Gain, Sensitivity and Limiters
SCVPL 70 V peak
Sensitivity for full power 6 dBu
Gain (all DSP controls set to 0 dB) 30.2 dB
Level adjustment (per channel) Software controlled from -inf to 0 dB
Connectors and Buttons
Analog input connectors (per ch.) Neutrik XLR, 3pin female
Analog input link connectors (per ch.) Neutrik XLR, 3pin male
AES input connectors (per ch.) Neutrik XLR, 3pin female
AES input link connectors (per ch.) Neutrik XLR, 3pin male
Output connectors (per ch.) Neutrik speakON / binding post
Buttons Power, Menu, Back, Mute (per ch.), Power
Encoder Adjust / Set
Cooling Single fan, front to rear airflow, no filter required, temperature controlled speed
Power
Nominal voltage 100 – 240 VAC
Operating voltage 60 – 265 V AC
Standby consumption <6.5 W
Mains connector IEC inlet
Dimensions
Dimensions (Rack rail to rear panel) W: 483 mm (19”), H: 44 mm (1 U), D: 272 mm (10.7”)
Dimensions (Overall incl. handles and rear support) W: 483 mm (19”), H: 44 mm (1 U), D: 344 mm (13.5”)
Finish
Finish Black anodized aluminum front and black / gray steel chassis
Approvals
Approvals CE, PSE, UL 60065, CAN/CSA-C22.2, No.60065:03, FCC part 15 Class A, EN 55103-1, EN55103-2, ROHS