LUCIA 120 / 2M bietet eine einfache Installation mit 2 x 60 W dezentraler Leistung in einem kompakten, EnergyStar-kompatiblen Verstärker.
LUCIA 120/2M
Technische Daten
Model | LUCIA 120/2M |
General | |
Number of amplifier channels | 2 |
Max total output all channels driven | 120 W |
Max output voltage per channel | 31 V peak |
Max output current per channel | 5.5 Arms |
Max output power (all channels driven) | |
2 ohms | 60 W |
4 ohms | 60 W |
8 ohms | 60 W |
16 ohms | 30 W |
Performance | |
THD 20 Hz – 20 kHz at 1 W into 8 ohms | <0.3% |
THD at 1 kHz and 1 dB below clipping | <0.2% |
Signal to Noise Ratio | >98 dBA |
Channel separation (Crosstalk) at 1 kHz | >60 dBA |
Frequency Response | 5 Hz – 22 kHz |
Input impedance | 10 kOhm |
Common Mode Rejection (CMR) | 40 dB |
Gain, Sensitivity and Limiters | |
VPL for 16 ohm mode | 31 Vpeak |
VPL for 8 ohm mode | 31 Vpeak |
VPL for 4 ohm mode | 22 Vpeak |
VPL for 2 ohm mode | 15 Vpeak |
Sensitivity, balanced input | 4 dBu / 1.23 Vrms |
Sensitivity, RCA input | -2 dBu / 0.62 Vrms |
Input headroom for clip, balanced 1 | 12 dBu / 3.09 Vrms |
Input headroom for clip, RCA 1 | 6 dBu / 1.55 Vrms |
Connectors and Buttons | |
Input connectors (per ch.) | 3 – pin detachable screw terminals, electronically balanced |
Input connectors (ch. 1 & 2) | Unbalanced RCA type |
Output connectors (per ch.) | 2 – pin detachable screw terminals |
Line-level output connectors (ch. 3 & 4) | 3 – pin detachable screw terminals, electronically balanced |
GPO (power state output) 2 | Contact closure type, 2 pins in a detachable screw terminal Default for external monitoring of fault/protection/power off |
RS232 | Can be controlled and monitored by third parties via RS232 using both the GPI pins |
USB | For firmware update and configuration for the matrix models |
Level adjustment (per channel) | Front panel potentiometer, detented from -inf to 0 dB |
Processing Features | |
Input processing block 3 | Default with 16 parametric EQs |
Mix matrix routing block 3 | 4 in – 4 out mix-matrix controllable from GPI |
Output processing block 3 | 4 EQ sections per output (presets available for many loudspeakers) User adjustable output look ahead limiter ADLC (Adaptive ISO 226 compensation) |
Two line level outputs 4 | Each capable of driving 10 LUCIA devices in parallel |
Latency from any input to any output | User adjustable from 9.15 to 137 ms |
Power | |
Nominal voltage | 100 – 240 VAC |
Operating voltage | 85 – 265 VAC |
Mains connector | IEC inlet |
Cooling | One fan, no filter required, front to rear airflow, temperature controlled speed. Can stay off if the sustained power average stays below 2 × 6 W and the ambient temperature is below 25 C |
Auto mode | The power state is controled automatically by the audio signal |
Dimensions | |
Dimensions | W: 216 mm (8.5”), H: 44 mm (1 U), D: 280 mm (11”) |
Weight | |
Weight | 1.9 kg (4.2 lbs) |
Finish | |
Finish | Black aluminum front and black steel chassis |
Approvals | |
Approvals | CE, CSA, CCC, PSE, FCC, Energy Star |
Notes
- 1: An analog soft limit will be engaged on the input above thislevel to reduce the clip distortion
- 2: Can be configured for different functionality such as RS232 via USB.
- 3: DSP settings determined by settings downloaded from the Application Browser software; not configurable on the unit itself.
- 4: Noise levels typically allow daisy chaining of 3 LUCIA amplifiers without issues